Please use this identifier to cite or link to this item: http://148.72.244.84/xmlui/handle/xmlui/7171
Full metadata record
DC FieldValueLanguage
dc.contributor.authorKhalid Ibrahim-
dc.contributor.authorAhmed A. Mansor-
dc.contributor.authorBilal J. Noman-
dc.contributor.authorWisam D. Salman-
dc.contributor.authorAhlam S. Mohammed-
dc.date.accessioned2023-10-24T16:20:17Z-
dc.date.available2023-10-24T16:20:17Z-
dc.date.issued2021-
dc.identifier.issn1999-8716-
dc.identifier.urihttps://djes.info/index.php/djes-
dc.identifier.urihttp://148.72.244.84:8080/xmlui/handle/xmlui/7171-
dc.description.abstractIn recent years, new methods have developed utilizing steel plates instead of deformed steel bar reinforcement in the concrete beams. This paper presents the utilization of a new proposed approach for replacing the main flexural reinforcement concrete beams by steel checker plates of (6mm) thickness. Four reinforced concrete beams were cast and tested under two-point load. All beams had the same cross-sectional area of reinforcement and the dimensions of 210 cm in length, 35 cm in height and 25cm in width. The result show there was a reduction in crack load, yield load, and ultimate load of steel plate as compared to steel bar, Whereas increased with increasing cross-sectional area of the steel. Once, the increment in crack load and yield load of steel plate were 25.5% and 16,67% more than steel bar whereas the same increment was found in ultimate load for both steel bar and steel plate. The measured crack load and ductility for steel plate was 16.7% more than steel bar when increasing cross-sectional area of steel. The deflection past of failure for steel plate has a considerable deflection before failure than steel bar. Finally, the observations show cracks have been much wider and less in range for all steel plate samples in comparison with the steel bar.en_US
dc.language.isoenen_US
dc.publisherUniversity of Diyala – College of Engineeringen_US
dc.titleEffect of Replacing the Main Reinforcement by Sheet Steel Plate in Reinforced Concrete Beamsen_US
dc.typeArticleen_US
Appears in Collections:مجلة ديالى للعلوم الهندسية / Diyala Journal of Engineering Sciences (DJES)

Files in This Item:
File Description SizeFormat 
12-884.pdf705.87 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.